Renting a sewer jetter or drain camera lets you test the equipment on real jobs before you commit thousands of dollars to it. You find out what works on your lines, your sites, and your crew, not just what looks good on a spec sheet.
That matters because drain cleaning equipment is specialized. A hydro jetter that’s undersized for your pipes, or a camera with too small of a cable for your typical runs, costs you on every job until you replace it. A short drain camera rental or jetter rental takes the guesswork out of that decision.
Seattle Pump & Equipment Co. has handled sales, rentals, service, and repairs since 1952. The advice below comes from our customers’ experiences, and from our technicians, the same people who set up, repair, and maintain this equipment every day. It’s not a sales pitch, just what we’ve learned about renting smart and buying right.
Buy or Rent a Drain Jetter or Sewer Camera? How to Decide
The right answer comes down to two things: how often you’ll use the equipment, and how much downtime would cost you if you didn’t have it.
When Renting Makes Sense
Renting is the smarter move when the work is occasional, uncertain, or temporary. That includes:
-
Occasional or seasonal drain work. If you only clear lines a few times a year, owning a jetter means paying for equipment that sits most of the time.
-
Testing a new service line. Thinking about adding drain cleaning or sewer inspection to your services? Rent first and see if the demand is there before you invest.
-
One-off large jobs. A big commercial line or municipal project can outgrow your current setup. Renting gets you the right machine for that job without buying one you’ll rarely need again.
-
Backing up your fleet during repairs. When your own jetter or camera is in the shop, a rental keeps your schedule intact.
When Buying Makes Sense
Buying starts to pay off once the equipment becomes part of how you make money every week:
-
Weekly or daily use. If the machine goes out regularly, ownership usually wins.
-
Recurring contracts. Municipal, facilities, and commercial maintenance contracts mean predictable work, and predictable work justifies owning the right tools.
-
Rental costs that add up to a payment. Once your rental spend starts looking like a monthly equipment payment, it’s time to run the numbers on buying.
Rent vs. Buy at a Glance
|
Factor |
Renting |
Buying |
|
Frequency of use |
Occasional, seasonal, or one-off jobs |
Weekly or daily work |
|
Upfront cost |
Low; pay only for the days you need it |
Higher, but it builds equity in your fleet |
|
Maintenance responsibility |
Handled by the rental provider |
Yours, so a solid maintenance plan matters |
|
Flexibility |
Try different sizes and setups job to job |
Built around your most common work |
Why Try a Sewer Jetter Before You Buy
Jetters aren’t one-size-fits-all, and the wrong setup costs you time and cleaning power on every job. That’s exactly why a sewer jetter rental makes such a good test drive.
Matching Flow and Pressure to Your Pipe Sizes
Most people shop jetters by PSI. Experienced operators look just as hard at GPM. Pressure (PSI) gives the water its cutting force, helping the nozzle break through grease, scale, and debris. Flow (GPM) is the volume of water that carries that debris down the line and scours the pipe walls clean. GPM & PSI truly combine to create jetting impact that clears blockages and buildup from the line.
In smaller lines, pressure does a lot of the work. In residential side-sewers and larger commercial / municipal lines, flow does most of the heavy lifting. A high-pressure, low-flow machine can punch a hole through a blockage in a larger line without actually clearing it, which invites another clog to quickly form.
A hydro jetter rental lets you see how a given PSI and GPM combination performs on the pipe sizes you run most. That’s the core of proper equipment matching, and it’s a lot cheaper to learn on a rental than on a machine you already own.
Cart, Trailer, or Skid-Mount: Testing Portability on Real Sites
Specs don’t tell you how a machine handles a basement cleanout, a tight alley, or a crowded mechanical room. A drain jetter rental does. Each setup has its trade-offs:
-
Cart jetters are compact and roll through doorways and into buildings, which makes them a good fit for indoor work and smaller lines.
-
Trailer jetters carry more water and power and tow easily between sites, but they need room to park and set up near the access point.
-
Skid-mount units install in a truck or van for a ready-to-go rig, but they commit that vehicle to the setup.
During your rental, pay attention to transport, site access, and setup time. Ten extra minutes of setup on every call adds up fast over a busy season.
Nozzles and Hose Length
The nozzle does the real work at the end of the hose, and different blockages call for different jetter nozzles:
-
Penetrating nozzles use forward-facing jets to punch through stoppages.
-
Cleaning or flushing nozzles use rear-facing jets to scrub pipe walls and pull the hose down the line.
-
Root-cutting & grease-cutting nozzles use rotating or cutting heads built for root intrusion.
Running a water jetter rental on your own jobs shows you which nozzles you actually reach for, so you don’t overbuy a kit full of heads you’ll never use.
Hose matters too. Make sure the hose length covers your longest typical run from the access point, and that the hose diameter suits the lines you clean most. A hose that’s too large struggles around bends in small lines, while one that’s too small limits the flow you can deliver in bigger pipe.
Pro Tip: Watch your jetter hose for wear, kinks, and abrasion. A worn hose costs you cleaning power and can fail in the middle of a job. If you see exposed braiding, flat spots, or soft sections, it’s time for a replacement jetter hose.
Pressure Washer Jetter Kit vs. a Dedicated Sewer Jetter
Many operators get started with a sewer jetter kit for their pressure washer. It’s an affordable way to handle light drain work with equipment you already own. As drain jobs grow in size and frequency, though, a pressure washer drain jetter setup often hits its limits on flow, hose length, and run time.
Renting a dedicated sewer jetter shows you whether that jump makes sense for your business before you spend the money.
Pro Tip: Run the rental on your toughest typical job, not your easiest one. That’s the job your purchase has to handle.
Why Try a Sewer Camera Rental Before You Buy
A camera tells you what you’re dealing with before you start jetting. A sewer camera rental is the best way to find out which inspection features you actually use on the job.
What to Test During a Drain Camera Rental
-
Cable diameter and flexibility. Salle pipes will require a thinner, more flexible cable to move through tight turns in the line. Larger lines will require a thicker cable that is stiff enough to push the camera-head to the end of your typical runs, with some to spare.
-
Cable length. Make sure the cable reaches the far end of your typical runs, with some to spare.
-
Camera head size. Smaller heads navigate small-diameter lines and tight bends, while larger heads with brighter lighting suit bigger pipe.
-
Locator and sonde features. A sewer camera with a locating “sonde” (effectively a beacon) lets you pinpoint the depth and position of a problem from above ground, so you dig or cut in the right spot. The “Locator” is a separate receiver tool that picks up the sonde’s radio-frequency and displays the camera’s location.
-
Recording and reporting. Built-in recording, photos, and reports let you document the job for customers, property managers, or inspectors.
A pipe inspection camera rental lets you try these features in real conditions, from cast iron in older buildings to long commercial laterals.
Inspect, Clean, Verify: Pairing a Sewer Camera With a Jetter
The camera and the jetter work best as a team. Our technicians recommend a simple three-step approach:
-
Inspect. Run the camera first to find the blockage, its location, and the condition of the pipe.
-
Clean. Choose the right nozzle and jet the line based on what you saw.
-
Verify. Run the camera again to confirm the line is clear and nothing was missed.
That before-and-after footage does double duty. It confirms the job was done right, and it gives your customers visual proof of the work they paid for.
Common Mistakes When Renting Drain Equipment
A rental is only a fair test if you set it up right. These are the mistakes our technicians see most often:
-
Skipping the camera inspection before jetting. Jetting blind can mean the wrong nozzle, wasted time, or missing a broken or collapsed pipe that jetting won’t fix.
-
Using the wrong nozzle for the blockage or buildup to be cleared. A flushing nozzle won’t cut roots, and a penetrating nozzle won’t scour grease off pipe walls.
-
Running without an adequate water supply. A jetter can only deliver the flow your water source gives it.
-
Choosing undersized equipment to save on the rental rate or because it’s more compact. A smaller machine that can’t clear your lines isn’t a fair test, and it’s not a savings.
-
Not asking for a setup walkthrough. A few minutes with the rental team at pickup can save hours on the job.
Pro Tip: Before you start, confirm your water source can keep up with the jetter’s flow. Running a pump starved for water causes damage fast. If the supply can’t keep pace, use a water tank so the pump always has water to draw from.
Keep Jobs Moving When Your Equipment Is in the Shop
Renting isn’t only for trying before you buy. It’s also one of the best ways to protect your schedule.
Equipment breaks down, usually at the worst possible time. When your jetter or camera is in for repairs, a rental keeps crews working and customers happy instead of forcing you to reschedule jobs and lose revenue.
Rentals also help during busy seasons, when you need temporary fleet expansion without adding another machine to your books year-round.
There’s a real advantage when in-shop repair and rental come from the same team. At Seattle Pump & Equipment Co., we can get your equipment into the shop and get you a rental to keep work moving, all in one stop. So whether it’s your jetter or your camera that’s in for service, don’t get caught with your pumps down.
What to Expect When Renting from Seattle Pump & Equipment Co.
Here’s how our rental process works, and why it matters who you rent from.
How the Rental Process Works
Our rentals are built for contractors and commercial operators. Before a jetter or camera goes out, we take a few minutes to talk through the job, your lines, and your experience with the equipment. It’s a quick step with one purpose: making sure the right equipment goes out with the right operator.
Do you need experience to rent a sewer jetter? Hands-on experience helps, since jetters run at high pressure and demand care. If you’re newer to drain work, tell us. Our technicians will walk you through setup, nozzle selection, and safe operation at pickup so you’re ready on the job.
If the rental proves the equipment is right for you, we’ll help you make the move to ownership, and we’ll keep servicing and repairing it long after you buy.
We work with contractors, municipalities, and facilities teams throughout Seattle and the surrounding area. If you’re looking for a sewer camera rental or sewer jetter rental near you, stop by the shop or give us a call.
Why Rent From an Equipment Specialist Instead of a Rental Counter
A general rental counter can hand you a machine. An equipment specialist makes sure it’s the right machine for the job, and stands behind it.
-
Technician guidance. The people helping you understand flow, pressure, nozzles, and cameras because they repair this equipment every day.
-
Commercial-grade equipment. Rentals built for professional drain work, not occasional weekend use.
-
Service support behind every rental. If something goes wrong, you’re working with a team that has its own repair shop.
When you’re ready to buy, you get that same expert guidance on the sales side, with equipment matched to the work you actually do.
Rent It, Test It, Then Invest With Confidence
Renting a sewer jetter or drain camera is the simplest way to avoid an expensive buying mistake. You test equipment on real jobs, match flow, pressure, and features to the work you do, and protect your uptime when your own equipment is down.
Ready to put a jetter or camera to work? Contact our rental team or stop by the shop to talk through your drain cleaning needs with a technician. When the job’s dirty, we deliver it clean.
Frequently Asked Questions
Can you rent a sewer camera?
Yes. Many equipment specialists rent sewer and drain cameras for short-term jobs, often with locator and recording features. Seattle Pump & Equipment Co. rents commercial-grade sewer cameras to contractors and commercial operators, with technician guidance at pickup. Contact our rental team to check availability for your next inspection job.
How much does it cost to rent a sewer camera?
Sewer camera rental cost depends on the camera system, cable length, features like a built-in locator or recording, and how long you need it. Daily and weekly rates vary by model. For current pricing on a camera that fits your pipe sizes and typical runs, give our rental team a call.
Will your rental sewer jetter cut roots?
Yes, with the right nozzle our “rooter class” Brute and Eagle jetter are commonly used to cut out tree roots. However, small electric-powered “mini jetters” do not have the GPM/PSI power to run a root-cutting nozzle-head. But pairing a “rooter class” jetter with a root-cutting nozzle can cut through and clear root intrusions in many lines. Inspect the line with a sewer camera first to confirm roots are the problem and check the pipe condition, since heavy roots or damaged pipe may need repair, not just cleaning.
Can I use a sewer jetter kit on my pressure washer?
Yes, a sewer jetter kit can turn many pressure washers into a light-duty drain jetter for smaller lines. For a full breakdown of when a kit works and when to step up, see our guide to sewer jetter kits for pressure washers
